5.0(10+ reviews)|20+ sold
Key Product Selling Points
- Precision Contour Sanding: 90mm triangular shape accesses corners, moldings, and complex profiles.
- Controlled Surface Refinement: 120-grit aluminum oxide balances material removal and finish preparation.
- Optimized Dust Extraction: Pre-punched holes enhance vacuum efficiency by 50%.
- Multi-Tool Versatility: Hook & loop backing fits all 90mm oscillating tools and detail sanders.
- Professional Durability: Resin-bonded E-weight paper withstands 20,000 OPM oscillation.
Detailed Product Description
These triangular 120-grit sheets deliver precise surface refinement for intricate finishing tasks. Engineered with aluminum oxide abrasive bonded to tear-resistant E-weight paper, they efficiently smooth transitions between surfaces, feather edges, and prepare contours for final finishing. The pre-punched holes maximize dust extraction when sanding drywall seams, wood filler, or varnish ridges in confined spaces. Compatible with oscillating multi-tools, these sheets are ideal for cabinetry, window frames, and furniture restoration requiring controlled material removal.
Direction for Use
For installation, clean the tool pad and align the sheet’s pre-punched holes with the dust ports, pressing firmly until the hook & loop fully engages. Use specific sanding techniques: trace profiles with light-medium pressure for contour sanding, use the wide base perpendicular to edges for edge blending, and guide the point into angles with an oscillating motion for corner work. Optimize material sanding by moving parallel to the grain direction for wood and varnish, and lubricate with a water-detergent mix for metal and plastic. Connect a HEPA vacuum to extraction ports and wear a NIOSH P100 respirator during operation. Maintain performance settings between 10,000–18,000 OPM and replace the sheet when dust output decreases significantly.
Materials
Abrasive: Aluminum oxide (120 grit). Backing: E-weight cellulose paper. Bond: Phenolic resin. Adapter: Abrasion-resistant nylon loop fabric.
Product Warnings
Wear mandatory PPE, including EN 166-certified goggles and a NIOSH P100 respirator. Never operate without activated dust extraction. Test surfaces for lead content before sanding. Maximum pressure is 4kg force to prevent premature wear. Discard if the backing delaminates or tears. Store sealed below 55% relative humidity.
