Key Product Selling Points
- Heavy-Duty Coverage: 150mm width tackles large masonry surfaces efficiently.
- Surface-Optimized Bristles: Medium-stiff synthetic filaments grip rough concrete and brick textures.
- Traditional Craftsmanship: Wooden handle and bristle bed withstand rigorous outdoor use.
- Masonry-Specific Design: Engineered exclusively for exterior masonry paints.
- Weather-Resistant Performance: Withstands UV exposure and temperature extremes.
Detailed Product Description
This professional 150mm masonry brush combines traditional woodcraft with modern synthetic technology for demanding exterior surface work. The medium-stiff bristles penetrate porous concrete, brick, and block textures to force paint deep into substrates, while the hardwood handle and solid bristle bed provide superior balance during vertical application. Specifically designed for solvent-based and acrylic masonry paints, it delivers uniform coverage on walls, foundations, and outdoor structures while resisting abrasion and weather degradation. Ideal for contractors refreshing façades, boundary walls, or garden features with long-lasting protection.
Direction for Use
Prepare the surface by removing debris with a wire brush and rinsing surfaces, allowing masonry to dry for a minimum of 48 hours. Stir masonry paint thoroughly without thinning. Load the brush by dipping the lower 40% of the bristles into the paint and scraping excess on the container edge. For application, work vertically starting at the top and pulling downward, applying firm pressure to force paint into pores. Overlap strokes by 25% to avoid lap marks and recharge the brush every 3-4 strokes. For cleanup, immediately rinse with water for acrylic paints or mineral spirits for solvent-based paints, scrubbing residual paint from the bristle bed. Store the brush by hanging it vertically in a dry location.
Materials
Bristles: PET-polyester copolymer filaments (medium-stiff). Handle & Bristle Bed: FSC-certified hardwood. Ferrule: Galvanized steel.
Product Warnings
Wear EN 166-certified goggles and EN 374 gloves. Ensure adequate ventilation, as solvent fumes are hazardous. Avoid skin contact with masonry paints. Never exceed 35°C during application. Clean within 30 minutes after use to prevent paint curing. Store away from direct sunlight to prevent wood cracking. Discard if bristles splay or wood splits.
