Key Product Selling Points
- Clog-Free Performance: Double-sided silicon carbide mesh resists loading during wet/dry sanding.
- Professional Finish: 100-grit abrasive delivers controlled material removal without scratching.
- Multi-Surface Versatility: Effective on plasterboard, rough timber, rusted metal, and painted surfaces.
- Dust Management: Open mesh structure allows debris to pass through for cleaner sanding.
- Economical Efficiency: 5m roll provides extended project coverage.
Detailed Product Description
This 115mm × 5m silicon carbide sanding mesh roll combines aggressive material removal with exceptional durability. The double-sided abrasive coating and open mesh design prevent clogging during drywall finishing, wood shaping, or metal preparation tasks. Engineered for orbital sanders and hand sanding blocks, it maintains consistent cutting performance while allowing dust extraction systems to capture particles efficiently. Ideal for contractors tackling restoration projects, rust removal, and surface preparation across diverse substrates.
Direction for Use
Prepare your tool by cutting the required length using a utility knife and attaching it to the sander by aligning with the hook & loop pad or clamping it in a manual holder. For surface-specific techniques, use light pressure with an orbital sander (3,000-6,000 RPM) on drywall, apply firm pressure in a crosshatch pattern for rust removal, and follow the grain direction with moderate pressure on wood. Connect a vacuum to the sander when possible for dust management, and wear a NIOSH-approved respirator for hand sanding. Replace sections when the abrasive dulls or clogs by advancing the roll to a fresh section as needed.
Materials
Abrasive: Silicon carbide (SiC) grains (100 grit). Backing: Polyester mesh with latex reinforcement. Adhesive: Heat-resistant resin bond.
Product Warnings
Always wear EN 166-certified goggles and a NIOSH P100 respirator. Secure workpieces before operation. Never use on asbestos-containing materials. Avoid excessive pressure to prevent premature wear. Store the roll sealed in plastic to prevent moisture absorption. Discard if the backing tears. Not for use on soft metals such as aluminum or copper.
